Key takeaways
- Find the best snowmobile ice scratchers for hard pack snow trails. Compare five carbide and steel options for engine cooling and slider care on icy routes.
Hard pack snow leaves a snowmobile with very little loose snow to throw back onto the sliders and heat exchangers. When a trail is firm, smooth, and icy, friction builds under the track, sliders wear down sooner, and engine heat climbs with each mile. Ice scratchers close that gap by kicking up a fine spray of snow and ice chips behind the track, where moving parts can use the spray for cooling and lubrication.
This guide looks at five snowmobile ice scratchers for hard pack snow: a carbide tip model with a simple one-bolt mount, a left and right kit with claw spares, a cable design for taller tracks, a stainless steel set with rail saver hooks, and a billet aluminum kit built from spring steel.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most riders on hard pack snow, the Between the Lines Designs 1201-DF DuraFlex Ice Scratchers are the clear pick, with carbide tips, a compact 17 inch form, and one-bolt mounting for reverse and non-reverse machines. The KEMIMOTO kit is a strong second choice for Polaris, Arctic Cat, and Ski-Doo riders who want left and right scratchers with claw spares included.
How to Choose Snowmobile Ice Scratchers
Fit comes first. Check whether a scratcher suits reverse and non-reverse gear, and whether it suits your track height. Some kits are made for track heights of 2-1/2 inches, while others suit taller tracks of 2-1/2 inches and more. A scratcher that is too short will not reach the snow, while one that is too long can drag or catch on rough ground.
Tip material shapes how long a scratcher lasts on ice. Carbide tips hold an edge on frozen surfaces and cut into hard pack with less wear than plain steel. Stainless steel resists rust in wet snow, while high-grade spring steel flexes over bumps and returns to shape.
Mounting and spray matter on the trail. One-bolt mounting keeps fitting simple and lets you remove the scratchers in minutes when the snow turns soft. Billet aluminum posts add a firm anchor point, while cable designs bend and flex over rocks and uneven ice. A claw that digs well makes a steady spray onto the sliders and heat exchangers.
1. Between the Lines Designs 1201-DF DuraFlex Ice Scratchers
The Between the Lines Designs 1201-DF DuraFlex Ice Scratchers are a carbide tip set built for hard pack snow and icy trails. They measure 17 x 6 x 1 inches, use one-bolt mounting, and fit all reverse and non-reverse gear equipped snowmobiles.
Specs
| Feature | Detail |
|---|---|
| Tip material | Carbide |
| Size | 17 x 6 x 1 inches |
| Mounting | One-bolt mounting |
| Fit | All reverse and non-reverse gear equipped snowmobiles |
| Purpose | Engine cooling and slider lubrication |
Buying Guide
This set suits riders who want a simple, proven scratcher that fits a wide range of machines. The carbide tips cut into frozen trails and throw up a steady spray, while the flexible arm absorbs shocks from ice ridges and frozen ruts.
Who It’s For
This set is for riders with reverse or non-reverse machines who want a universal fit and a carbide tip that lasts on ice. It suits trail and lake riders on firm snow.
FAQ
Do these fit reverse gear machines?
Yes, they fit all reverse and non-reverse gear equipped snowmobiles.
What size are they?
They measure 17 x 6 x 1 inches.
What do carbide tips do?
They cut into hard pack snow and throw spray onto the sliders.
How do they mount?
They use one-bolt mounting for a quick fit.
Final Verdict
A simple, tough, universal carbide set that leads this guide for hard pack snow.
2. KEMIMOTO Snowmobile Ice Scratcher Kit, 2 Pcs
The KEMIMOTO Snowmobile Ice Scratcher Kit includes two scratchers, one for the left side and one for the right side, plus claw replacement accessories. It fits reverse and non-reverse gear equipped snowmobiles, suits track heights of 2-1/2 inches, and fits Polaris, Arctic Cat, and Ski-Doo machines.
Specs
| Feature | Detail |
|---|---|
| Kit | 2 Pcs, left and right |
| Accessories | Claw replacement accessories included |
| Fit | Reverse and non-reverse gear equipped snowmobiles |
| Track height | Recommended for 2-1/2 inches |
| Compatibility | Polaris, Arctic Cat, and Ski-Doo |
Buying Guide
This kit suits riders who want a matched left and right pair with spares ready to go. The claw replacement accessories mean a worn claw can be swapped without buying a new set, which helps on long seasons with many icy miles. Use the pair together for even spray on both sides of the track.
Who It’s For
This kit is for Polaris, Arctic Cat, and Ski-Doo riders with a 2-1/2 inch track who want a complete left and right set. It suits riders who value spare claws.
FAQ
How many scratchers are included?
Two scratchers, one left and one right.
Are spare claws included?
Yes, claw replacement accessories are included.
Which brands does it fit?
It fits Polaris, Arctic Cat, and Ski-Doo.
What track height is recommended?
It is recommended for track heights of 2-1/2 inches.
Final Verdict
A complete left and right kit with spares, made for the most common trail brands.
3. GREATUS Ice Scratchers Kit, 2 Pcs
The GREATUS Ice Scratchers Kit includes two scratchers built from galvanized steel wire rope cable. It uses one-bolt mounting and fits all reverse and non-reverse gear equipped snowmobiles. The cable design is made for track heights of 2-1/2 inches and taller.
Specs
| Feature | Detail |
|---|---|
| Design | Galvanized steel wire rope cable |
| Kit | 2 Pcs |
| Mounting | One-bolt mounting |
| Fit | All reverse and non-reverse gear equipped snowmobiles |
| Track height | For 2-1/2 inches and taller |
Buying Guide
This kit suits riders with taller tracks who need a scratcher that can reach down to firm snow. The galvanized steel wire rope cable flexes over ice ridges and rough ground, then returns to shape without bending out of line. One-bolt mounting keeps the fit simple, and the universal fit covers reverse and non-reverse machines.
Who It’s For
This kit is for riders with track heights of 2-1/2 inches and taller who want a flexible cable scratcher. It suits deep lug riders who need extra reach on hard pack snow.
FAQ
What is the cable made from?
It is made from galvanized steel wire rope cable.
How many scratchers are included?
Two scratchers are included in the kit.
Does it fit reverse gear machines?
Yes, it fits all reverse and non-reverse gear equipped snowmobiles.
What track height does it suit?
It suits track heights of 2-1/2 inches and taller.
Final Verdict
A flexible cable kit that reaches well on taller tracks and firm snow.
4. ICE SHAVERS Stainless Steel Snowmobile Ice Scratchers with Carbide Tips
The ICE SHAVERS Stainless Steel Snowmobile Ice Scratchers pair a stainless steel body with pressed and welded carbide tips. The kit includes two ice scratchers and two rail saver hooks, and it is universal on forward and reverse snowmobiles. A one year warranty is included.
Specs
| Feature | Detail |
|---|---|
| Material | Stainless steel |
| Tip material | Pressed and welded carbide tips |
| Kit | 2 ice scratchers and 2 rail saver hooks |
| Fit | Universal on forward and reverse snowmobiles |
| Warranty | 1 year warranty |
Buying Guide
This set suits riders who want rust resistance and a firm carbide edge in one kit. Stainless steel holds up in wet snow and slush, while the pressed and welded carbide tips stay in place on hard ice. The rail saver hooks protect the rails when the scratchers are folded back for soft snow or for loading.
Who It’s For
This set is for riders who want stainless steel durability, carbide tips, and rail protection in one kit. It suits riders who park outdoors and ride in wet snow.
FAQ
What are the tips made from?
They are pressed and welded carbide tips.
How many hooks are included?
Two rail saver hooks are included.
Does it fit reverse machines?
Yes, it is universal on forward and reverse snowmobiles.
What warranty is included?
A one year warranty is included.
Final Verdict
A rust resistant stainless set with carbide tips and rail hooks for lasting use.
5. Fly Racing Ice Scratcher Kit XF15-6395
The Fly Racing Ice Scratcher Kit XF15-6395 uses CNC machined billet aluminum mounting posts and high-grade spring steel scratchers. It improves engine cooling and hyfax life on hard pack snow, and the spring steel flexes over bumps.
Specs
| Feature | Detail |
|---|---|
| Model | XF15-6395 |
| Mounting posts | CNC machined billet aluminum |
| Scratcher material | High-grade spring steel |
| Purpose | Improves engine cooling and hyfax life |
| Surface | Hard pack snow |
Buying Guide
This kit suits riders who want a firm, well made mount and a spring steel scratcher that holds its angle. The CNC machined billet aluminum posts give a solid anchor on the rail, while the high-grade spring steel bends over ice ridges and springs back without losing shape. On hard pack snow, the steady tip angle throws a consistent spray onto the sliders and heat exchangers.
Who It’s For
This kit is for riders who want a premium mount and a durable spring steel scratcher for hard pack snow. It suits trail riders who value a firm fit and steady cooling.
FAQ
What are the mounting posts made from?
They are CNC machined billet aluminum mounting posts.
What are the scratchers made from?
They are made from high-grade spring steel.
What does this kit improve?
It improves engine cooling and hyfax life on hard pack snow.
Does it suit hard pack snow?
Yes, it is made for use on hard pack snow.
Final Verdict
A well built kit with billet posts and spring steel for steady hard pack cooling.
Tips for Everyday Use
Fit both scratchers before a ride and check that each tip touches the snow at a firm angle. Fold them back with the rail hooks when the trail turns soft, so they do not drag or wear on bare ground. After a ride, brush off ice and snow and check the bolts. On a frozen lake, lower the scratchers early, since the surface is often the firmest part of the ride.
Caring for Your Picks
Rinse off salt, grit, and road grime after a ride, and dry the arms and tips before storage. A light coat of oil on steel parts helps guard against rust in a damp garage. Check carbide tips for chips and cracks, and replace a worn claw before it loses its edge. Store scratchers folded back, with the tips covered.
Frequently Asked Questions
Do I need ice scratchers on groomed trails?
Yes, groomed trails are often firm and icy, with little loose snow for the sliders.
Can I ride with scratchers folded back?
Yes, fold them back with rail saver hooks when the snow is soft or when you load the machine. That keeps the tips from dragging and wearing down on bare ground.
How do I know if my scratchers are working?
Look for a steady spray of snow and ice chips behind the track. If the spray is strong and even on both sides, the scratchers are digging well.
Will scratchers fit my track height?
Check the fit notes for each kit and match the kit to your machine.
Final Verdict
The Between the Lines Designs 1201-DF DuraFlex Ice Scratchers are the best pick for most riders on hard pack snow, with carbide tips, one-bolt mounting, and a universal fit. The KEMIMOTO kit is a strong choice for riders who want spares, while the GREATUS cable kit suits taller tracks. The ICE SHAVERS set adds stainless steel and rail hooks, and the Fly Racing kit brings billet posts and spring steel.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!