Key takeaways
- Find the best snowmobile handlebar mitts for cold trail riding. Compare insulated, windproof and rigid-shell gauntlets that fit over handguards.
If you want the short answer, start with the Kolpin Geartector Cold Weather Handlebar Mitts. They combine a windproof and waterproof shell, a plush lining, a locking draw cord, and a rigid front plate, covering the four things that matter most on a snowmobile: wind protection, water protection, warmth, and control access. For a lower-cost option, the SPI Snowmobile Handlebar Gauntlets use a foam-bonded lining and a clear control window. Between those ends of the range, the Kemimoto mitts add a touch-friendly phone bag, the Rockbros covers add a thermal fleece lining, and the GEARS Rigid Handlebar Muffs add a hard shell.
As an Amazon Associate, we earn from qualifying purchases.
Snowmobile handlebar mitts, also called gauntlets, muffs, or pogies, are not gloves. They are oversized covers that slip over the handlebars, grips, levers, and handguards, and they stay on the machine. You slide your hands inside them while wearing light or midweight gloves, and the mitt creates a sheltered pocket of still air around each hand. Wind chill at trail speed strips heat from bare gloves quickly, and a mitt blocks that wind before it reaches your fingers. It also keeps snow off your hands, so your gloves stay drier for longer. The five picks below cover budget, mid-range, and premium groupings, and each is described from its published specifications.
Table of Contents
- How to Choose Snowmobile Handlebar Mitts
- Quick Comparison
- Kolpin Geartector Cold Weather Handlebar Mitts
- Kemimoto Snowmobile Handlebar Mittens
- SPI Snowmobile Handlebar Gauntlets
- Rockbros Handlebar Covers
- GEARS Rigid Handlebar Muffs
- How to Fit and Use Handlebar Mitts Safely
- Frequently Asked Questions
- Conclusion
How to Choose Snowmobile Handlebar Mitts
Start with fit. A mitt that is too tight will press against the throttle and brake levers and make it hard to reach the kill switch. A mitt that is too loose will flap at speed and let wind in around the cuff. Measure your handlebar controls, including the handguards, and compare that measurement with the dimensions listed for the mitt. Look for a wide, reinforced opening and a cuff that draws tight around the bars. A locking draw cord, a drawstring, or hook-and-loop straps all seal the mitt to the handlebar so cold air cannot rush in from behind.
Next, look at the shell and lining. A windproof and waterproof shell keeps the air inside the mitt still and dry. Rigid front panels hold the mitt open and shield your knuckles from branches and ice pellets. Fleece and plush linings trap warm air, foam-bonded linings add insulation and structure, and thermal fleece linings pair well with heated grips. A clear window on top lets you see the handlebar switches without pulling your hand out.
Quick Comparison
| Product | Best For | Standout Feature |
|---|---|---|
| Kolpin Geartector Cold Weather Handlebar Mitts | Best overall protection | Rigid front plate and plush lining |
| Kemimoto Snowmobile Handlebar Mittens | Phone access on the trail | Touch-friendly bag and wind-breaking guard |
| SPI Snowmobile Handlebar Gauntlets | Simple budget warmth | Foam-bonded lining and clear window |
| Rockbros Handlebar Covers | Cold-weather insulation | Thermal fleece lining and zippered pockets |
| GEARS Rigid Handlebar Muffs | Firm wind and debris protection | Hard shell and water-resistant exterior |
Kolpin Geartector Cold Weather Handlebar Mitts
The Kolpin Geartector Cold Weather Handlebar Mitts are the most complete option in this roundup. Kolpin describes them as fitting virtually any ATV or snowmobile, and the design is built around a large, reinforced opening that slips over the handlebars and controls with room to spare. That extra space means you can operate the throttle, brake, and switches inside the mitt without your fingers pressing against the shell, and it leaves room for a midweight glove underneath.
The shell is windproof and waterproof, the combination to look for when wind chill and wet snow arrive together. Inside, a plush lining creates a warm layer around your hands, while a locking draw cord seals the mitt to the handlebars. What sets the Geartector apart is its rigid front plate, which Kolpin calls a Rhino plate. It sits at the front of the mitt where wind, branches, and trail debris hit first, holds the mitt open so the shell does not collapse onto your knuckles at speed, and adds a barrier between your hands and anything the trail throws up. The listed dimensions are 16 by 9.5 by 4 inches, a generous size for riders with larger gloves, heated grips, and bulky handguards.
Specs
| Feature | Detail |
|---|---|
| Type | Handlebar mitts for snowmobile and ATV |
| Shell | Windproof and waterproof |
| Lining | Plush lining |
| Front protection | Rigid front plate |
| Closure | Locking draw cord |
| Dimensions | 16 by 9.5 by 4 inches |
Kemimoto Snowmobile Handlebar Mittens
The Kemimoto Snowmobile Handlebar Mittens are a mid-range option with a feature that will appeal to riders who navigate by phone: a touch-friendly bag on top of the mitt. That transparent pocket lets you view and operate a phone or GPS navigator without removing it from the bag, so you can check a trail map or confirm a turn without exposing your hands to the wind. The mitts also include a front wind-breaking guard, a stiffer panel at the front that blocks cold air before it reaches your hands, and reflective details for visibility in low light.
Closure is by hook and loop, which makes the mitts easy to fit and adjust around the bars, and easy to operate with gloves on at a cold trailhead. The mitts are listed as a mitten-style glove type, supplied as a pair, and described as compatible with snowmobiles, ATVs, and motorcycles. Inside, the design prioritises space and control access, with room to fit over handlebar covers and control clusters and reach the grips, throttle, and brake without the shell getting in the way.
Specs
| Feature | Detail |
|---|---|
| Type | Handlebar mittens for snowmobile, ATV, and motorcycle |
| Top feature | Touch-friendly bag for phone or navigator |
| Front protection | Front wind-breaking guard |
| Special features | Reflective details, touch screen support, windproof |
| Closure | Hook and loop |
| Fit | Universal handlebar fit |
SPI Snowmobile Handlebar Gauntlets
The SPI Snowmobile Handlebar Gauntlets are the simplest option in this roundup, and that simplicity is their strength. They are a budget-grouping pair built from flexible nylon taffeta with a foam-bonded lining, a combination that gives waterproofing, insulation, and structure in one layer. The foam bonding helps the gauntlet keep its shape, so it does not collapse onto your hands, and the nylon outer deflects wind and wet snow.
A clear window on top lets you see the handlebar controls without lifting the gauntlet, a useful feature at this level, where many budget mitts use a solid top. An elastic band around the opening gives a firmer hold on the handlebars while helping to lock out wind and cold, and a hook-and-loop seam makes installation and cleaning easier. You can open the seam, place the gauntlet over the bars and handguards, and close it around them, rather than forcing a closed mitt over a bulky control cluster. The listed item weight is 8.2 ounces for the pair.
Specs
| Feature | Detail |
|---|---|
| Type | Snowmobile and ATV handlebar gauntlets, pair |
| Shell | Flexible nylon taffeta |
| Lining | Foam-bonded lining |
| Water protection | Waterproof construction |
| Control visibility | Clear window |
| Closure | Hook-and-loop seam and elastic band |
Rockbros Handlebar Covers
The Rockbros Handlebar Covers are a mid-range option built around insulation. The outer material is 420D nylon, a tough, tightly woven fabric that provides windproof protection, and the inner lining is thermal fleece made with Thinsulate insulation. The listing notes that the covers support use in temperatures under 20 degrees Fahrenheit when worn with winter gloves. That guidance is worth following: a mitt works best as part of a system, with a glove inside providing the contact layer and the mitt providing the windproof shell around it.
An elastic band at the forearm stops wind entering from the arm side, while hook-and-loop straps and an elastic band with a buckle seal the cover around the bars. The covers also include two zippered pockets, one on each cover, plus reflective details. Fit is described as suitable for mountain bikes, electric bikes, ATVs, snowmobiles, and motorcycles, so check the size against your own bars and handguards before ordering.
Specs
| Feature | Detail |
|---|---|
| Type | Handlebar covers for snowmobile, ATV, motorcycle, and bike |
| Outer material | 420D nylon |
| Lining | Thermal fleece with Thinsulate insulation |
| Wind protection | Windproof shell with elastic forearm band |
| Closures | Buckle, hook and loop, and zipper |
| Storage | Two zippered pockets |
GEARS Rigid Handlebar Muffs
The GEARS Rigid Handlebar Muffs take a different approach from the soft mitts in this roundup. Instead of relying on fabric alone, they use a hard, gauntlet-style shell that holds its shape in all conditions. A soft mitt can be pressed flat against your hands by wind at speed, which reduces the insulating air pocket inside. A rigid shell keeps that pocket open, so your hands have room to move and the warm air stays trapped around the grips.
The exterior is water-resistant, and the muffs are described as windproof, with a focus on protection from harsh weather and road debris. That makes them a good match for riders who face a mix of wind, snow, sleet, and kicked-up ice, and for riders who push through brush where a soft shell could snag. The universal fit is listed for Polaris, Yamaha, Ski-Doo, Arctic Cat, Can-Am, Honda, and Kawasaki, which covers the main snowmobile brands. The product was first listed in April 2020, which gives it a longer track record than many universal muffs.
Specs
| Feature | Detail |
|---|---|
| Type | Rigid handlebar muffs for ATV, motorcycle, and snowmobile |
| Shell | Hard shell with water-resistant exterior |
| Wind protection | Windproof |
| Fit | Universal powersport fit |
| Compatible brands | Polaris, Yamaha, Ski-Doo, Arctic Cat, Can-Am, Honda, and Kawasaki |
| First available | April 2020 |
How to Fit and Use Handlebar Mitts Safely
Fit the mitts before you ride, not on the trail. Slide each mitt over the handlebar, grip, levers, and handguard, then tighten the draw cord, drawstring, or hook-and-loop closure so the mitt seals around the bars. Turn the handlebars fully left and fully right, and check the throttle, brake, kill switch, lights, and steering through the whole range. The mitts must not press the throttle, hold the brake on, or block the kill switch at any steering angle.
Wear a light or midweight glove inside the mitt, not a bulky ski glove. The mitt provides the wind and weather protection, and the glove inside provides grip and feel. A bulky glove inside a tight mitt will reduce your feel for the throttle and brake, and it can make your hands colder by restricting circulation. If you have heated grips, use them with the mitts, because the mitt traps the heat inside. Remove the mitts when you park in wet snow for a long period, and let them dry with the opening open to the air.
Frequently Asked Questions
Do snowmobile handlebar mitts work with handguards?
Yes, most handlebar mitts are designed to fit over handguards as well as the handlebars, grips, and levers. Check the mitt dimensions against the width of your handguards and controls, and look for a wide reinforced opening. If your handguards are large, a roomier mitt with a zipper or hook-and-loop seam will be easier to fit. Always turn the bars fully left and right after fitting to confirm that the mitt does not interfere with the throttle, brake, or kill switch.
Do I still need gloves inside handlebar mitts?
Yes. Handlebar mitts are covers that stay on the machine, and they work best with a light or midweight glove inside. The glove gives you grip and feel on the throttle and brake, and it keeps your hands warm when you take them out of the mitt at a stop. A bulky glove inside a tight mitt can reduce control feel and restrict circulation, so choose a thinner glove than you would wear without mitts.
Are handlebar mitts waterproof?
It depends on the model. Some mitts, such as the Kolpin Geartector and the SPI gauntlets, are described as waterproof, while others, such as the GEARS Rigid Handlebar Muffs, are described as water-resistant. A waterproof shell is a better match for wet snow and slush. A water-resistant shell will handle light snow and spray. Check the listing for the exact wording, and remember that seams, zippers, and the hand opening can all let moisture in if they are not sealed well.
Can I use snowmobile handlebar mitts on an ATV or motorcycle?
Yes, many of the mitts in this roundup are universal designs listed for snowmobiles, ATVs, and motorcycles. The Kolpin, Kemimoto, SPI, Rockbros, and GEARS models all list more than one vehicle type. Fit is the deciding factor, so compare the mitt dimensions with your own handlebars and controls, and check that the closure seals around the bars.
Conclusion
The best snowmobile handlebar mitts are the ones that seal out wind, keep snow off your hands, and leave you free to operate the throttle, brake, and switches without thinking about them. The Kolpin Geartector Cold Weather Handlebar Mitts lead this roundup because they combine a windproof and waterproof shell, a plush lining, a locking draw cord, and a rigid front plate in one package.
If phone access matters, the Kemimoto mitts add a touch-friendly bag in the mid-range group. If you want a simple budget option, the SPI gauntlets give you a foam-bonded lining and a clear control window. If insulation is your priority, the Rockbros covers add a thermal fleece lining and zippered pockets. If you want the firmest protection from wind and debris, the GEARS muffs use a hard shell to hold the warm air pocket open.
FAQ
Do snowmobile handlebar mitts work with handguards?
Do I still need gloves inside handlebar mitts?
Are handlebar mitts waterproof?
Can I use snowmobile handlebar mitts on an ATV or motorcycle?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!