Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best climbing skins for backcountry touring: mohair and nylon plush, glue types, widths, lengths, listed weights and fit notes for your skis.

Climbing skins turn a pair of touring skis into uphill tools. A plush underside grips snow when you stride forward and glides when you slide, while adhesive plus tip and tail hardware hold the skin flat against the base. Choosing well means matching plush material, width, length and attachment style to your skis and to the kind of days you plan, from short dawn laps near home to long hut routes deep in the range.

Our top pick: POMOCA Tour Pro Climbing Skins. Runner-up: Black Diamond Glidelite Mix Climbing Skins.

This guide compares five skins sold on Amazon, spanning mohair blends, full nylon plush and a washable hybrid adhesive. Each entry lists the format, the widths and lengths on offer, the attachment hardware and any maker weight figures, so you can line up the details that matter for your own setup before you order. Fit notes stay close to maker and retailer listings, and unconfirmed figures are flagged as such.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most touring skis, the POMOCA Tour Pro Ready2Climb balances glide and grip with a mohair and nylon plush and a quick trim fit. The Black Diamond Glidelite Mix suits skiers who want a light mix skin with Gold Label glue, while the G3 Alpinist+ Universal favors nylon grip. Contour Hybrid Mix adds a washable hybrid adhesive, and the Black Diamond Ultralite Mix STS keeps weight low.

How to choose

Plush material sets the glide and grip balance. Mohair glides well and packs small, which helps on long approaches. Nylon grips hard and shrugs off rough handling, which suits icy tracks and newer tourers. Blends sit between the two, mixing mohair glide with nylon toughness, and many skiers pick a blend for mixed snow and changing aspects through the day.

Width should cover the ski base without hanging over the edges. A common approach is to pick a skin near the width of the ski tail and trim it so the metal edges stay bare, which keeps edge hold on firm traverses. Length matters just as much: fixed length skins must match the ski length range on the listing, while cut to fit skins trim down from a longer blank and forgive small measuring errors.

Adhesive style shapes daily care. Traditional glue holds firmly and can be renewed with fresh glue sheets when the hold fades. Hybrid adhesive uses a two layer build that wipes clean and peels away with less fight, which many skiers like for repeated laps and warm spring days. Attachment hardware matters too: adjustable tip loops fit a wide range of ski tip shapes, and adjustable tails forgive small length errors when one skin serves two pairs of skis.

Weight adds up over a long climb, so check maker figures where published. They use differing widths and lengths from one brand to the next, so compare weights only when the listed size matches your setup.

POMOCA Tour Pro Climbing Skins

The Tour Pro is Pomoca’s all round touring skin in Ready2Climb form, with tip and tail hardware already fitted and a cutter in the box for trimming width. The mohair and nylon plush aims at the middle of the glide and grip range, and the EVER DRY 3.0 treatment is PFC free, which helps limit snow buildup on the plush during long climbs in wet spring snow. Maker weight figures are published per skin for a mid size, giving a clear point of comparison across the range.

Pick the Tour Pro if you want one skin for varied terrain and multi day routes, and you value published glide and grip figures when you shop. The Ready2Climb sizes run from XS to XL, so matching ski length is simple, and the adjustable tip loop fits a wide range of ski tip shapes without extra hardware swaps.

Specs

    • Plush: 65 percent mohair, 35 percent nylon
    • Format: Ready2Climb, sizes XS to XL
    • Width: 100 mm for this variant; widths up to 140 mm listed
    • Length: 180 to 189 cm for this variant
    • Weight: 224 g per skin (110 mm by 170 cm, maker figure)
    • Treatment: EVER DRY 3.0, PFC free
    • Attachment: Adjustable tip loop, adjustable tail, cutter included

    Black Diamond Glidelite Mix Climbing Skins

    The Glidelite Mix pairs a mohair and nylon plush with Black Diamond’s Gold Label adhesive, a long running glue known for a firm hold. The blend leans toward glide, so the skin feels at home on long approaches and rolling terrain where stride efficiency matters more than maximum bite. Pre-fitted tip and tail hardware keeps setup simple once the width is trimmed to the ski.

    The STS tail adjusts to fine tune the length, which helps when one skin serves two pairs of skis of similar length. Choose the Glidelite Mix if you tour often on moderate angles, want a blend that packs small, and prefer traditional glue with a long record in the touring market.

    Specs

      • Plush: 65 percent mohair, 35 percent nylon
      • Adhesive: Gold Label
      • Width: 110 mm and 135 mm listed
      • Length: 175 to 186 cm for this variant
      • Attachment: Pre-fitted tip attachment, STS adjustable tail
      • Weight: Not stated
      • Skin savers: Not stated

      Contour Hybrid Mix Climbing Skin

      Contour’s Hybrid Mix stands out for its adhesive. Instead of classic glue, the hybrid build uses two layers that hold the skin to the base and wipe clean with water, so lint and dirt lift away rather than building up over a season. Peeling the skin from the ski takes less force, which helps during quick changeovers between laps.

      The plush is a mohair and nylon blend tuned for all round use, and the skin trims to width much like a glue skin. Pick the Hybrid Mix if glue care has put you off skins before, or if you lap short tours often and want a skin that folds and stores without sticking to itself or to everything in the pack.

      Specs

        • Plush: 70 percent mohair, 30 percent nylon
        • Adhesive: Hybrid two layer, washable
        • Width: 110 mm for this variant
        • Length: 161 to 168 cm for this variant (size M)
        • Weight: 1 lb 6 oz listed for the 115 mm by 176 cm size
        • Attachment: Not stated
        • Trim tool: Not stated

        G3 Alpinist+ Universal Climbing Skins

        The Alpinist+ Universal uses a full nylon plush, which puts grip and toughness first. Nylon bites on firm, icy tracks and handles rough handling at busy trailheads, making this a sensible pick for newer tourers and heavily used skis. A PFC free waterproofing treatment helps the plush shed moisture on wet days and limits icing along the edges.

        G3 shapes the tip with an extended TPU platform and self aligning stainless steel hooks that find the ski tip quickly, and the camming tail clip holds tension along the skin. A removable rip strip eases the pull when skins stick hard in cold weather. A trim tool and skin savers come in the box, so the kit is complete on arrival.

        Specs

          • Plush: 100 percent nylon
          • Width: 115 mm for this variant (size XS)
          • Weight: 291 to 353 g by size
          • Treatment: PFC free waterproofing treatment
          • Tip: Extended TPU stiff platform, self aligning stainless steel hooks
          • Tail: Camming tail clip, removable rip strip
          • Included: Trim tool and skin savers
          • Origin: Made in BC, Canada

          Black Diamond Ultralite Mix STS Climbing Skins

          The Ultralite Mix STS is Black Diamond’s light mix skin, built around a mohair and nylon plush in a cut to fit kit. The tip loop uses Dynex cord and aluminum, and it can be swapped in the field if a loop wears or breaks, which suits long trips far from a shop. Gold Label adhesive provides the hold along the full length of the skin.

          The patented STS tail gives a run of adjustment, so one kit can cover skis of differing lengths within its range. Choose the Ultralite Mix STS if low pack weight matters, you are comfortable trimming skins and fitting tip hardware yourself, and you want hardware you can repair away from home with simple tools.

          Specs

            • Plush: 65 percent mohair, 35 percent nylon
            • Adhesive: Gold Label
            • Width: 125 mm for this variant; 110 mm and 140 mm also listed
            • Length: Cut to fit; tips ship unattached in the STS kit
            • Tip: Field replaceable Dynex and aluminum tip loop
            • Tail: Patented STS, 10 cm adjustment range
            • Weight: Not stated

            Who should skip

            Skip this group if your skis are very wide powder boards and none of the listed widths cover your base, or if you tour only on groomed uphill lanes and prefer low weight race style skins, which sit outside this guide. Skip the hybrid adhesive model if you want classic glue that a shop can renew for you, and skip cut to fit kits if you would rather not trim skins or fit tip hardware yourself. This guide covers fit, plush and hardware only; it makes no claims about where any skin should be used.

            FAQ

            How wide should climbing skins be?

            Pick a width close to the widest part of your ski, often the tail, then trim the skin so the metal edges stay bare. Full coverage gives more grip on traverses, while a narrower skin glides a bit better and weighs less. The listing width is the untrimmed width, so check it against your ski before ordering.

            What plush material suits mixed snow?

            A mohair and nylon blend is the common middle path, mixing mohair glide with nylon grip and toughness. Full nylon grips hardest on firm tracks but glides less freely. High mohair blends glide well and pack small, though the plush can wear faster on rough, icy snow late in the season.

            How do I care for skin adhesive?

            Let skins dry at room temperature after each tour, plush side out, and store them folded with skin savers or stuck base to base in a cool spot. Keep glue away from dirt and pet hair. Hybrid adhesive wipes clean with water; classic glue can be renewed with glue transfer sheets when the hold fades.

            Can one pair of skins fit two pairs of skis?

            Often, yes, if the widths and lengths are close. Adjustable tails and tip loops forgive small gaps, and a skin trimmed for the wider ski still works on a narrower one, though edges may sit under plush. Check the length range on the listing against both skis before you rely on one set.

            Final verdict

            For a single skin covering most touring days, the POMOCA Tour Pro Ready2Climb brings a balanced plush, published weight figures and simple sizing. The Black Diamond Glidelite Mix is the pick for glide minded skiers who like Gold Label glue, while the G3 Alpinist+ Universal serves grip first nylon fans. The Contour Hybrid Mix wins on easy adhesive care, and the Ultralite Mix STS suits weight watchers who can trim and fit a kit. Match width and length to your skis first, then choose plush and adhesive.

            Product and ASIN Reference

            Product ASIN
            POMOCA Tour Pro Climbing Skins B0DJ1RNVBV
            Black Diamond Glidelite Mix Climbing Skins B08FBFWWBY
            Contour Hybrid Mix Climbing Skin B07YZ7TQ75
            G3 Alpinist+ Universal Climbing Skins B0BJLFS665
            Black Diamond Ultralite Mix STS Climbing Skins B01L9VEZ7M
            A
            admin@88
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            How wide should climbing skins be?
            Pick a width close to the widest part of your ski, often the tail, then trim the skin so the metal edges stay bare. Full coverage gives more grip on traverses, while a narrower skin glides a bit better and weighs less. The listing width is the untrimmed width, so check it against your ski before ordering.
            What plush material suits mixed snow?
            A mohair and nylon blend is the common middle path, mixing mohair glide with nylon grip and toughness. Full nylon grips hardest on firm tracks but glides less freely. High mohair blends glide well and pack small, though the plush can wear faster on rough, icy snow late in the season.
            How do I care for skin adhesive?
            Let skins dry at room temperature after each tour, plush side out, and store them folded with skin savers or stuck base to base in a cool spot. Keep glue away from dirt and pet hair. Hybrid adhesive wipes clean with water; classic glue can be renewed with glue transfer sheets when the hold fades.
            Can one pair of skins fit two pairs of skis?
            Often, yes, if the widths and lengths are close. Adjustable tails and tip loops forgive small gaps, and a skin trimmed for the wider ski still works on a narrower one, though edges may sit under plush. Check the length range on the listing against both skis before you rely on one set.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Climbing Skins for Backcountry Ski Touring DaysCheck price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free
            Amazon Business

            A free business account with business pricing and bulk-buying tools for work, shop or home office.

            Create a business account

            As an Amazon Associate we earn from qualifying purchases.